Historical Look at Elevator Evolution

First Elevators

The history of the elevator, if you define it as a platform that can move people and objects vertically, is actually a rather prolonged one. Primitive elevators are known to have operated in use in ancient Rome as long ago as 336 B.C., with the first reference of one built by the talented Archimedes.

Work Platforms Operated Manually

These early elevators were open cars as opposed to enclosed ones, and featured a platform with hoists that would enable the car to move vertically. The hoists were typically worked manually, either by people or animals, though sometimes water wheels were used. Romans continued to use these simple elevators for several years, usually to move water, building materials, or other heavy items from one place to another.

Personal Passenger Elevator

When it comes to the dedicated passenger elevator, this was created in the 18th century, with one of the first used by King Louis XV in 1743. He had an elevator constructed at Versailles that would carry him from his apartments on the first floor to his mistress’ apartments on the second floor. This elevator wasn’t a whole lot more technologically advanced than those used in Rome. To make it work, men stationed in a chimney pulled on the ropes. They referred to it as a “flying chair.”

Steam Powered Advancements

It wasn’t until the 1800s that elevator technology really began to advance. For starters, elevators no longer required to be worked manually. In 1823, two British architects– Burton and Hormer– built a steam-powered “ascending room” to take tourists up to a platform for a view of London. Several years later, their invention was expanded upon by architects Frost and Stutt who added a belt and counter-weight to the steam power.

Hydraulic Systems Introduced

Soon enough, hydraulic systems began to be created as well, using water pressure to raise and lower the elevator car. However, this wasn’t practical in some cases– pits had to be dug below the elevator shaft to enable the piston to draw back. The higher the elevator went, the deeper the pit had to be. Thus, this wasn’t a viable option for taller buildings in big cities.

Safety Concerns Inhibit Growth

So despite the hydraulic systems being somewhat safer than steam-powered/cabled elevators, the steam powered ones with cables and counterweights, remained. They had just one major drawback: the cables could snap, and sometimes did, which sent the elevator plummeting to the bottom of the shaft, killing passengers and damaging building materials or other items being transported. It goes without saying, nobody was jumping to get on these dangerous elevators and so passenger elevators up to this point were largely a novelty.

Safety Brake Invention

The man who solved the elevator safety problem, making skyscrapers possible, was Elisha Otis, who is generally referred to as the inventor of the modern elevator. In 1852, Otis came up with a design that had a safety “brake.” On the occasion that the cables broke, a wooden frame at the top of the elevator car would snap out and hit the walls of the shaft, stopping the elevator in its tracks.

Daring Elevator Safety Demonstration

Otis himself demonstrated the device, which he called a “safety hoist,” at the New York World’s Fair in 1854, when he rose in a make-shift elevator himself and had the ropes cut. Instead of plummeting to his death as the audience thought might happen, his safety hoist snapped out, catching the elevator within seconds. Needless to say, the crowd was impressed.

Otis Elevator Company

Otis proceeded to found his own elevator company, which installed the first public elevator in a New York building in 1874. The Otis Elevator Company is still known today as the world’s largest elevator manufacturer.

Introduction of Electrical Powered Elevators

While the cable elevator design has remained, many additional improvements have been made, the most obvious of which is that elevators now function on electricity instead of steam power, a change that came about starting in the 1880s. The electric elevator was patented by Alexander Miles in 1887, though one had been built by the German inventor Werner von Siemens in 1880.

Modern Safety

Otis’ safety hoist wasn’t completion of safety innovation, either. Nowadays, it’s virtually impossible for an elevator to plummet and kill passengers. There are now multiple steel cables to hold the elevator’s weight, plus a variety of different braking systems to stop an elevator from falling if the cables somehow snap. If, despite all these safety measures, the elevator does fall, there are shock absorbers at the bottom of the shaft, making it unlikely death will occur and reducing the possibility of serious injury.

Fast Construction Modular Elevators

Recently modular elevators were invented to drastically reduced construction project times. Modular Elevator Manufacturing built modular elevators are pre-engineered and DSA approved so they can be installed in one day.